This unit allows you to register up to 100 remote cameras as control targets by configuring the connection settings for each of the camera numbers CAM1 to CAM100. To select a remote camera to control from these cameras, you need to select the camera group to which it belongs beforehand.
Camera | Camera numbers | |
group | ||
|
1CAM1 to CAM10
2CAM11 to CAM20
3CAM21 to CAM30
4CAM31 to CAM40
5CAM41 to CAM50
Camera | Camera numbers | |
group | ||
| ||
|
| |
6 | CAM51 to CAM60 | |
|
| |
7 | CAM61 to CAM70 | |
|
| |
8 | CAM71 to CAM80 | |
|
| |
9 | CAM81 to CAM90 | |
|
| |
10 | CAM91 to CAM100 | |
|
|
Selecting a camera group
1.Press the mode selection button [SELECT] to turn off the button indicator.
2.Hold down a camera selection button [CAMERA SELECT/GROUP SELECT] to select the camera group to which the remote camera you want to control belongs.
When a camera group is selected, the corresponding camera group indicator [CAMERA GROUP] lights and the indicator of the camera selection button that was held down blinks. When the camera selection button lights, the remote cameras can be operated from the unit.
1
2
Example: When camera group “10” is selected
Notes
zzWhen selecting a camera group, hold down the camera selection button.
zzAfter a camera group is selected, it takes approximately 5 seconds in the case of IP connections and approximately 20 seconds in the case of serial connections for operation of the remote cameras to become possible.
(When AW‑HE50, AW‑HE60 and AW‑HE120 are connected, and they are all powered on.)
37