Parts and their functions (continued)
R/B PED dials [R/B PED]
Use these to individually adjust the pedestal of the R channel and B channel (R PED and B PED) in order to set the desired black balance.
Turned clockwise : Displays the setting values of the R PED and B PED on the LCD panel and changes the value in the plus (+) direction.
Turned counterclockwise: Displays the setting values of the R PED and B PED on the LCD panel and changes the value in the minus
zzPressing these dials displays the current setting values on the LCD panel ().
Color adjustment ENABLE button [ENABLE]
Use this to enable or disable operation of the color adjustment section.
Button indicator on : Operation of the color adjustment section is enabled.
Button indicator off : Operation of the color adjustment section is disabled.
zzOperating the DETAIL button (), GAIN button (), PED dial (), R/B GAIN dials (), and R/B PED dials () switches the LCD panel display to the corresponding value, but the original display is redisplayed after approximately 3 seconds.
Menu and memory selection section
| | |
| ||
| ||
| | |
| | |
| |
Indicator section
Main mode selection buttons [MENU] [PMEM] [TMEM]
Use these to select the operation mode of the menu and memory selection section.
Pressing a button turns on the button indicator of only that button and switches to the corresponding operation mode.
MENU: Switches to the mode for selecting a menu (MENU mode).
⇒“Basic operations for the menus” (page 20)
PMEM: Switches to the mode for recalling, storing, and deleting preset memory (PMEM mode).
⇒“Operating preset memory (PMEM)” in <Operations and Settings> (page 12)
TMEM: Switches to the mode for recalling, storing, deleting, and restoring tracing memory (TMEM mode).
⇒“Operating tracing memory (TMEM)” in <Operations and Settings> (page 18)
IRIS indicator [IRIS]
This indicates the position of the lens iris of the remote camera in 6 levels.
ZOOM indicator [ZOOM]
This indicates the position of the lens zoom of the remote camera in 6 levels.
FOCUS indicator [FOCUS]
This indicates the position of the lens focus of the remote camera in 6 levels.
Memory mode selection buttons
[MEM STORE] [MEM DELETE] [RESTORE]
Use these to select any operation from store, delete, and restore when PMEM or TMEM has been selected with the corresponding main mode selection button ().
Pressing a button when its indicator is off turns on the button indicator of only that button and switches to the corresponding operation mode.
Pressing a button when its indicator is on turns off all three button indicators and switches to the mode for recalling memory (RECALL mode).
MEM STORE : Switches to the mode for storing memory (STORE mode).
MEM DELETE : Switches to the mode for deleting memory (DELETE mode).
RESTORE : Switches to the mode for restoring tracing memory (RESTORE mode).
zzFor details on each mode, refer to the following.
⇒“Operating preset memory (PMEM)” in <Operations and Settings> (page 13)
⇒“Operating tracing memory (TMEM)” in <Operations and Settings> (pages 18 to 21)
16