Operating Instructions
Data Entry Field
Wireless | Select a wireless network mode from Disable, "802.11b", "802.11b/g" or |
Network Mode | "802.11g only". |
| • Select Disable when you do not want to send/receive wireless data. |
| • "802.11b" sends/receives data on a 2.4 GHz band. Compatible products |
| are abundant and low priced. Not only is it easy to use, but it is also |
| already widespread so it is useful when you want to use your other |
| wireless devices. |
| • "802.11b/g" sends/receives data on a 2.4 GHz band. It combines the |
| features of "802.11b" and "802.11g", and is compatible with both |
| wireless LAN specifications. It is also easy to introduce into existing |
| wireless environments. |
| • "802.11g only" can only send/receive data to and from the 802.11g. If |
| this product's data sending/receiving mode is set to "802.11g only", it |
| does not support "802.11b/g" integration mode, but the original |
| 802.11g's capabilities are realized. It is faster and reaches further than |
| "802.11b/g", so is good to use when sending/receiving data between |
| floors. |
| • When using "802.11g only", if other 2.4.GHz band wireless devices |
| (including the "802.11b" wireless device) exist, the data speed is |
| reduced. |
|
|
SSID | A name is given to the network on a wireless LAN. This name is called |
| SSID. |
| The SSID can be set on each device connected to the wireless LAN, and |
| data can only be sent/received to and from devices with the same SSID. |
| Enter the SSID following the guidelines below. (The |
| already entered in the default settings. It is displayed on the rear of this |
| product.) |
| • It is |
| names.) |
| • Enter no more than 32 characters. |
|
|
Stealth SSID | For the wireless LAN device to detect the network, there is a function |
| whereby the SSID, which is a network identifier, is sent out to surrounding |
| devices at regular time intervals. If Disable is selected, the wireless LAN |
| device can detect the network easily. However, unauthorized users can also |
| find the network and try to connect to it, so there a possible security |
| weakness. By selecting Enable on the stealth SSID function, it is possible to |
| use this product to make the network hard to detect for unauthorized users. |
| When Enable is set, connection through the ANY key can be denied. The |
| default is set to Enable. |
|
|
50