Panasonic BL-WV10 manual Sensor

Getting Started

3.11 Sensor

Issue	Causes and Solutions
The built-in sensor	The built-in sensor does not detect motion while
(BL-C10, BL-C30, etc.)	privacy mode is turned on.
does not detect motion.	• The built-in sensor is turned off while privacy
	mode is turned on. Turn the feature off to
	restore the built-in sensor.
	Something is blocking the built-in sensor.
	• Even transparent materials like glass and
	acrylic can greatly impact the built-in sensor’s
	sensitivity. Remove anything in the way of the
	sensor.
	The surface of the built-in sensor is dirty.
	• Clean the sensor.
	The built-in sensor is attempting to detect people and
	animals outside of its range.
	• The built-in sensor works by detecting
	changes in temperature brought on by human
	movements within its range (30 horizontal
	degrees, 85 vertical degrees and 5 m in
	distance). As a result, when the differences in
	temperature are slight, the range is slowly
	abbreviated. If there is no change in
	temperature (despite movement) within the
	range, the sensor may not detect anything as
	a result. When changes in temperature are
	drastic, the sensor range can be extended.
	• The built-in sensor detects heat variations
	which occur from the sides with more
	accuracy than variations which approach the
	camera.
	• The detection range of the built-in sensor may
	increase or decrease depending on the
	temperature and environment where the
	camera is installed.
	If using a wireless camera with a built-in sensor, poor
	wireless network conditions may be interfering with
	the connection between the camera and the
	BL-WV10.
	• Try relocating the camera if possible.

42