Getting Started
3.9Camera Indicator
Issue |
| Causes and Solutions | |
|
| ||
After turning the power on, | The Ethernet cable is not correctly connected. | ||
the indicator is either solid | • | ||
amber or flashing amber. | |||
The router is not working properly. | |||
| |||
| • | Check the router. | |
| You are attempting to connect a wireless camera with | ||
| a wired/wireless switch, such as the | ||
| mode but the wired/wireless switch is set to wireless, | ||
| or you are attempting to work in a wireless mode and | ||
| the wired/wireless switch is set to wired. | ||
| • Set the switch to the appropriate setting. | ||
|
| ||
The indicator continues to | The Quick Setup settings are incomplete. | ||
flash green. | • | ||
| |||
|
| ||
The indicator continues to | There is something wrong with a camera. | ||
flash red. | • | Contact your dealer. | |
| |||
|
| ||
The indicator is red. | Privacy mode is turned on. | ||
| • Either press the PRIVACY button on the front | ||
|
| of the camera or turn off privacy mode (see | |
|
| “Camera Setup for Local Cameras” on | |
|
| page 93 of the Operating Instructions). | |
|
| ||
The indicator does not | The wireless signal between the | ||
turn green when using the | wireless camera is poor. | ||
wireless LAN. | • Change the camera location, remove any | ||
| |||
|
| potential obstructions and try the connection | |
|
| again. | |
|
|
|
38