Panasonic warranty CD Player, Display, Track Selection, Disc Eject Pause, 16CQ-C300U

CD Player

Cautions		place objects on it while it is open.
		• Do not pinch your finger or hand in the face plate.
• This unit does not support 8 cm {3"} discs.		• Do not insert foreign matter into the disc slots.
• Do not insert a disc when	indicator lights	• Refer to the section on “Notes on CD/CD Media (CD-ROM,
because a disc is already loaded.		CD-R, CD-RW)” ( page 28).
• Do not use irregularly shaped discs. ( page 28)		• A disc which has both CD-DA data and MP3/WMA data on it
• Do not use discs that have a seal or label attached.		may not be reproduced normally.
• To avoid damaging the face plate, do not push it down or

When a disc is already loaded, press [SOURCE] to select the CD mode.

1 Press [OPEN] to open the face plate. 2 Loadup. a disc with the printed side facing

Note: It may take some time to start playing.

	[] (Eject)
Flow	Printed side
Operation	• The unit recognizes the disc and starts playing	Track Selection
	3 Close the face plate manually.	4 Select a desired portion.
	Notes:
	automatically.	[] (TRACK): Next track
	• The power will be turned on automatically when a disc
		[] (TRACK): Preceding track (press twice)
	is loaded.
		Note: Hold down for fast forward/reverse.
	Disc Eject	Pause
	1Press [OPEN].
		Press [].
	2Press [] and take the disc out.
		Press again to cancel.
	3Close the face plate manually.

Display	Play Mode indicators	Track number	Time
	Lights when each mode is
ModeCD	activated.
	Random play
	Repeat play
			Lights when the disc is loaded.

16CQ-C300U