Panasonic CQ-C300U warranty General, Plate Removing/Mounting, Face

General

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

Power On/off (PWR: Power)

Power on

Press [PWR] (Power).

Power off

Hold down [PWR] (Power) for 1 sec. or more.

English

Plate Removing/Mounting	(Anti-Theft System)
Face

You can remove the face plate to prevent it from being stolen.

Removing

1 Turn off the power. ( above)

2 Press [OPEN]. The face plate will be opened.

3 Push the face plate to the left.

4 Pull it out toward you.

5 Put the face plate in the case.

Cautions

•This face plate is not waterproof. Do not expose it to water or excessive moisture.

•Do not remove the face plate while driving your car.

•Do not place the face plate on the dashboard or nearby areas where the temperature rises to high.

	General
Mounting
	Preparation,
1 Fit the face plate with its left hole on the
left pin provided on the main unit.
2 Fit the other hole on the other pin
applying slight pressure.

•Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.

•If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.

•To avoid damaging the face plate, do not push it down or place objects on it while it is open.

Display Change (DISP: Display)

The display changes as follows every time [DISP] is		At power-on:
pressed.
		When the power is set to ON, refer to the description for
		each source mode.
At power-off:
	Clock display (Default)
	Display off

CQ-C300U11