36 Turn the printer off.

•Reconnect J/P317.

•Disconnect J/P308 and J/P309.

•Turn the printer on.

•Check J/P330-1 for +24 Vdc.

Is the voltage +24 Vdc?

No: Repair the duplex control board #1, then turn to TAG 002: Check & Problem Resolution.

Yes: Repair or replace the connectors or wiring from: P309 pins 7 through 10 to J313 pins 1 through 4 P308-1 to J314-1

P308-2 to J315-1

P308-3 to J316-1, or

P308-4 to P317-1;

then turn to TAG 002: Check & Problem Resolution.

Troubleshooting Analysis Guide (TAGs)

3-101