HP C30 manual Tool Requirements Service Kit, Tools/Supplies, End User Cleaning Kit

Introduction

•Do not push objects of any kind through the cabinet slots. They may contact danger- ous voltage points or other hazards.

•

•

Do not expose the printer to liquids of any kind.

Protect the power cord. Do not place it in a traffic pattern or allow anything to rest on it.

Tool Requirements: Service Kit

A service kit intended for use solely by the service technician is shipped inside the right side cover of the printer. This kit includes:

•

•

•

•

•

Interlock by-pass tools (2)

RS-232C loop back assembly

RS-422 loop back assembly

Multimeter jumpers (2)

Corona cleaner brush

Tools/Supplies

To service the printer properly, you will also need to carry the following:

•

•

•

•

•

•

Soft cleaning cloth

Cotton swabs

Corona cleaner

Basic set of hand tools suitable for office automation equipment repair

Digital multimeter with test leads, alligator clips, and a high voltage probe

Service vacuum cleaner, properly grounded and equipped with a 10 micron filter

End User Cleaning Kit

Printers are shipped with an end-user cleaning kit taped inside the front cover. The clean- ing kit consists of:

•

•

Cotton swabs

Corona cleaner brush

This kit is intended for use by the end user.

Printer/Maintenance Record

A maintenance record must be kept for every printer. During the initial service call or at the time of installation, set up a maintenance record for the customer. A copy of the form, illustrated on the following page, should be kept in the Guide to Operations so that the maintenance form is always easily accessible.

9-4 General Printer Maintenance