HP C30 Disk Drive Test Single Loop With Stop on Error, Disk Drive Test Drive Indications Display

(109 intentionally excluded)

112 Disk Drive Test (Single Loop With Stop on Error)

This test reads data from the drive selected. It checks the seek function, cycle redundancy, parity, checksum, directory and allocation table integrity, and disk format.

1Go to: 112

2Insert a diskette or diskettes in the diskette drive or drives you wish to test.

3Press: READY to run the test. “0” appears on the display indicating the A: drive.

4Press: CANCEL to advance to the drive you wish to test.

Table 5-27. Disk Drive Test Drive Indications

Display Indication

0Floppy drive A:

1Floppy drive B:

2Hard drive C:

5Press: READY to activate the drive.

6If no errors are found, the test exits automatically.

7If an error code appears, refer to the Table 2-8, “IGS/Disk Drive Error Codes,” on page 2-7, to determine which TAG to follow.

8Press: STOP to exit, if errors are found.

9To test another drive, repeat this procedure starting with Step 2.

Diagnostic Tests 5-25