6 Turn off the printer and unplug the power cord.

•Disconnect P26 and P40.

•Check P26-1 to P40-2 for continuity.

Is there continuity?

No: Repair or replace the connectors or wiring from P26-1 to P40-2, then turn to TAG 002: Check & Problem Resolution.

Yes: Repair or replace the erase lamp assembly. If this resolves the problem, turn to TAG 002: Check & Problem Resolution. If this does not resolve the problem, replace the PCL board, turn to TAG 002: Check & Problem Resolution.

3-66

Troubleshooting Analysis Guide (TAGs)