5 Reconnect the transfer charger high voltage unit lead.
•Disconnect J/P23 and J/P41.
•Check
Is there continuity?
No: Repair or replace the connectors or wiring from
Yes: Continue.
6 Replace the transfer charger.
Has the problem been resolved?
No: Replace the high voltage unit. If this resolves the problem, turn to TAG 002: Check & Problem Resolution. If the problem has not been resolved, replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
Yes: Turn to TAG 002: Check & Problem Resolution.
Troubleshooting Analysis Guide (TAGs) |