Paper Timing Roller RemovalPaper Timing Roller Removal

To remove the paper timing roller:

1Open the front, back, and top covers.

2Raise the upper paper guide.

3Remove the photoconductor and place it in its protective bag.

4Remove the paper feed drive cover (three screws).

5Remove the paper feed drive belt from the paper timing roller gear.

6Disconnect CN65.

7Unscrew the standoff post from the collar surrounding the end of the roller.

8Remove the front C-clip and bearing.

9Slide the paper timing roller out the back of the printer.

Replacement Notes:

•

•

Reinstall the original collar and standoff post with any new paper timing roller. Be sure to align all of the guide pins or the C-clip will not fit correctly.

Paper Feed

Drive Cover

CN65

C-Clip

and Bearing

 

Collar

Cassette Release Cover

Standoff Post

 

Front Detail

Removal/Replacement Procedures

7-59