Main Motor RemovalMain Motor Removal
Caution
Do not allow the capacitor contacts to short out against your body or the printer frame.
To remove the main motor:
1Disconnect all external cables and attachments.
2Open the front, back, and top covers.
3Remove the photoconductor and place it in its protective packaging.
4Remove the cleaner unit.
5Remove the back cover. (See page
6Remove the lower back cover. (See page
7Remove the signal interface board. (See page
Drive Shaft Key |
| |
Main Motor Gear | Main Drive Cover | |
Gear Stay Cover | ||
| ||
| Gear Stay | |
| Fuser Drive Cover |
Back Detail
Removal/Replacement Procedures |