11 Run diagnostic test 008.
•Check
Is the voltage +12 Vdc?
No: Continue.
Yes: Replace the power control #3 board, then turn to TAG 002: Check & Problem Resolution .
12 Run diagnostic test 008.
•Check
Is the voltage +12 Vdc?
No: Replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
Yes: Repair or replace the connectors or wiring from
13 Run diagnostic test 008.
Does the tone sound steadily while the output tray moves back and forth?
No: Continue.
Yes: Repair or replace the job offset assembly, then turn to TAG 002: Check & Problem Resolution .
14 Turn the printer off and unplug the power cord.
•Disconnect J/P53, J/P55, and J/P40.
•Check
Is there continuity?
No: Repair or replace the connectors or wiring from
Yes: Continue.
15 Check
Is there continuity?
No: Repair or replace the connectors or wiring from
Yes: Continue.
16 Check
Is there continuity?
No: Repair or replace the connectors or wiring from
Yes: Continue.
Troubleshooting Analysis Guide (TAGs) |