“C” Roller Solenoid Removal“C” Roller Solenoid Removal
To remove the “C” roller solenoid:
1Open the top cover.
2Remove the front mechanism cover (two screws).
3Disconnect CN315 and cut the cable tie securing the wires to the mounting plate.
4Remove the two screws holding the “C” roller solenoid in place.
5Loosen the set screw securing the actuator arm to the “C” roller.
6Disengage the solenoid from the actuator arm and remove it.
Replacement Note:
Install a new cable tie to secure the wires from CN315 to the mounting plate.
Actuator Arm
CN315
Mounting Screws
C Roller Solenoid Detail
Removal/Replacement Procedures |