1Select: 101
2Press: READY to run the test.
3If an error is found:
•The error code appears.
•Look up the code in “Error Code/TAG
•
4If no errors are found:
•The test continues to run.
•After about five minutes, press STOP to exit.
102 EIGS/MIGS Board Test (Continuous Loop)1Go to: 102
2Press: READY to run the test.
3If an error is found:
•The error code is displayed for at least 1 second.
•Look up the code in “Error Code/TAG
•If the test resumes, press STOP to exit; if the test does not resume,
4If no errors are found:
•The test continues to loop.
•Press STOP to exit.
Diagnostic Tests |