(109 intentionally excluded)107 EIGS/MIGS Bit Map Test (Single Loop)
1Go to: 107
2Press: READY to run the test.
3If no error is detected, the test exits automatically.
4If an error code appears, look it up in “Error Code/TAG
5Press: STOP to exit, if an error is reported.
108 EIGS/MIGS Bit Map Test (Continuous Loop)1Go to: 108
2Press: READY to run the test.
3If no errors are detected:
•
•
The test continues to loop.
Press STOP to exit.
4If an error is found:
•The error code displays briefly. If more than one error is detected, the error codes appear sequentially.
•Look up the codes in the “Error Code/TAG
•
Diagnostic Tests |