DC Power Supply RemovalDC Power Supply Removal

To remove the DC power supply:

1Open the front, top, and back covers.

2Disconnect CN6, CN7, CN8, and CN330.

3Remove the output tray.

4Remove the right side cover. (See page 7-9.)

5Remove the bracket for the output tray guide (two screws).

6Remove the DC power supply (two screws).

Replacement Note:

When replacing the output tray bracket, make sure it is seated inside the DC power supply.

CN330

Bracket Screws

CN6

DC Power Supply Screws

 

CN7

CN8

Right Side Detail

Back Detail

 

Removal/Replacement Procedures

7-31