How to Run Diagnostics
001 Operator Panel Test1Turn the volume control on the operator panel up fully.
2Go to: 001
3Press: READY to run the test.
4Confirm that the tone sounds and all lights turn on and off continuously.
5Press: STOP to exit.
002Upper Cassette Test1Make sure the upper paper cassette is installed with paper, the side and rear guides securely against the edges of the paper in the cassette.
2Go to: 002
3Press: READY to run the test.
4Refer to the chart below to confirm that the code that displays corresponds to the paper size in the cassette. (For example, if the cassette holds letter size paper,
Table
Display | Indication |
|
|
Cassette not installed | |
|
|
|
|
|
|
|
|
|
|
Executive 1 size paper in use | |
|
|
Executive 2 size paper in use | |
|
|
Executive 3 size paper in use | |
|
|
Envelopes in use | |
|
|
Undefined paper size | |
|
|
5Press: STOP to exit.
Diagnostic Tests |