HP Photosmart C30 Paper Exit Sensor Removal, Paper Exit Sensor Removal

Paper Exit Sensor RemovalPaper Exit Sensor Removal

To remove the paper exit sensor:

1Open the front, back, and top covers.

2Remove the fuser.

3Remove the operator panel. (See page 7-19.)

4Remove the exit pinch roller. (See page 7-68.)

5Disconnect CN49.

6Remove the two screws holding the exit cover in place (one front and one back).

7Tilt the exit cover assembly toward the center of the printer.

8From the underside, remove the paper exit sensor (single screw).

CN49

Paper Exit Sensor Detail

7-78 Removal/Replacement Procedures