Power Control Board RemovalPower Control Board Removal
To remove the power control board:
1Open the back cover.
2Remove the paper feed drive cover (three screws).
3Remove the power control board cover (one screw).
4Disconnect CN9, CN10, CN11, CN12, CN13, and CN14.
5Remove power control board (two screws).
Replacement Note:
Be sure that the back of the board is mounted properly in the frame slots.
Power Control
Board Cover
Paper Feed Drive Cover
Mounting Slots
CN14
CN13
CN9
CN11
CN12 CN10
Power Control Board Detail
Removal/Replacement Procedures |