TAG 013: Lower Cassette Not Latched
Error Code: | 013 |
Possible Defects: | Lower cassette release cam |
| Even Lower cassette release latch |
| Lower cassette in latch |
| Lower pressure lever |
| Spring |
| Lower cassette |
| Lower cassette in switch |
| Lower paper size sensor |
| Connectors or wiring |
| PCL board |
1 Turn the printer off and unplug the power cord.
•Verify that J/P40 and J/P52 are connected properly.
•Remove the lower cassette.
•Inspect it for damage.
•Reinsert the cassette.
Is the lower cassette properly latched?
No: Continue.
Yes: Go to #3 in this TAG.
2 Check the following for damage:
•Lower cassette release cam
•Lower cassette release latch
•Lower cassette in latch
•Lower pressure lever
•Spring
Are any of these parts damaged?
No: Return to the beginning of this TAG.
Yes: Replace the damaged parts, then turn to TAG 002: Check & Problem Resolution.
3 Remove the lower cassette.
•Make sure the lower cassette in switch actuator is functioning properly.
Is it in good working order?
No: Replace the actuator, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
4 Run self diagnostic test 003.
Is
No: Replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
Troubleshooting Analysis Guide (TAGs) |