Printhead Assembly RemovalPrinthead Assembly Removal
To remove the printhead assembly:
1Open the front, top, and back covers.
2Remove the photoconductor unit and place in its protective packaging.
3Remove the cleaner unit.
4Remove the fuser drive cover (three screws).
5Remove the main drive cover (one screw).
6Remove the gear stay cover (one screw).
7Remove the gear stay (three screws).
8Disconnect connectors CN27, CN30, and CN96 (see back detail).
9Remove the two back screws holding the printhead assembly in place.
CN27
Fuser Drive
Cover
CN30
CN96
Gear Stay
Gear Stay Cover
Mounting Screws
Main Drive Cover
Back Detail
Removal/Replacement Procedures |