Jogging Motor Control Board RemovalJogging Motor Control Board Removal
To remove the jogging motor control board:
1Open the back cover.
2Remove the paper feed drive cover (three screws).
3Remove the power control board cover (one screw).
4Disconnect CN100, CN101, and CN102.
5Disengage the board. To do this, pinch the two standoffs on the board.
6Lift the board from its mounting bracket.
Power Control
Board Cover
Paper Feed Drive Cover
Standoffs
| CN101 |
| CN100 |
CN102 | Mounting Bracket |
|
Jogging Motor Power Control Board Detail
Removal/Replacement Procedures |