3 Turn the printer off.
•Disconnect J/P330.
•Turn the printer on.
•Check
No: Is the voltage +12 Vdc?
No: Continue.
Yes: Go to #35 in this TAG.
4 Turn the printer off.
•Disconnect J/P32.
•Turn the printer on.
•Check
Is the voltage +12 Vdc?
No: Go to #8 in this TAG.
Yes: Continue.
5 Turn the printer off.
•Reconnect J/P32.
•Disconnect J/P74.
•Turn the printer on.
•Check
Is the voltage +12 Vdc?
No: Replace the IGS board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
6 Does the printer have an attachment option?
No: Replace the signal interface board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
7 Turn the printer off.
•Reconnect J/P74.
•Disconnect the DC cable (J/P73) for the attachment option.
•Check
Is the voltage +12 Vdc?
No: Replace the signal interface board, then turn to TAG 002: Check & Problem Resolution.
Yes: Replace the attachment option, then turn to TAG 002: Check & Problem Resolution.
Troubleshooting Analysis Guide (TAGs) |