32 Turn the printer off and unplug the power cord.
•Disconnect J/P40.
•Check
Is there continuity?
No: Continue.
Yes: Repair or replace the connectors or wiring from
33 Reconnect J/P40 and J/P12.
•Disconnect J/P102.
•Turn on the printer.
•Check
Is the voltage +12 Vdc?
No: Continue.
Yes: Replace the power control #3 board, then turn to TAG 002: Check & Problem Resolution .
34 Turn off the printer and unplug the power cord.
•Disconnect J/P40.
•Check
Is there continuity?
No: You have failed to isolate the problem. Return to the beginning of this TAG.
Yes: Repair or replace the connectors or wiring from
35 Turn off the printer.
•Reconnect J/P330.
•Disconnect J/P323.
•Turn on the printer.
•Check
Is the voltage +12 Vdc?
No: Go to #40 in this TAG.
Yes: Continue.
36 Turn off the printer.
•Reconnect J/P323.
•Disconnect J/P305.
•Turn on the printer.
•Check
Is the voltage +12 Vdc?
No: Go to #39 in this TAG.
Yes: Continue.
Troubleshooting Analysis Guide (TAGs) |