RemovalRemoval

This section includes step-by-step instructions for removing all field service replaceable parts in the printer. Each part is addressed under its own heading, as outlined on the preceding contents pages. Most of the procedures are applicable to both the simplex and duplex printer models. When the procedures differ between the two printers, the word simplex or duplex is included in parentheses.

Before You Begin

To remove a part, follow the instructions provided. To replace a part, follow the steps in reverse order unless otherwise noted. During reassembly, make sure to reconnect all connectors properly and seat gears and other moving parts properly.

Power Considerations

Before removing a part, make sure the printer is turned off and that the power cord is dis- connected.

Photoconductor Removal

If it is necessary to remove the photoconductor unit as part of a removal procedure, make sure to place it in its protective packaging.

7-4

Removal/Replacement Procedures