
5 Turn the printer off and unplug the power cord.
•Disconnect J/P41.
•Check
Is there continuity?
No: Continue.
Yes: Repair or replace the connectors or wiring that have continuity to ground:
6 Check
Is the resistance at least 1K‡WW?
No: Continue.
Yes: Replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
7 Remove the fuser unit.
•Check
Is there resistance?
No: Continue.
Yes: Repair or replace the connectors or wiring that have resistance:
8 Check
Is there resistance?
No: Replace the fuser unit, then turn to TAG 002: Check & Problem Resolution.
Yes: Repair or replace the connectors or wiring that have resistance:
Troubleshooting Analysis Guide (TAGs) |