Duplex Route Separator RemovalDuplex Route Separator Removal
To remove the duplex route separator:
1Open the top cover.
2Remove the rear duplex cover. (See page
3Remove the upper duplex roller cover (four screws).
4Remove the duplex route motor/solenoid assembly. (See page
5Remove the front mechanism cover (two screws).
6Open the duplex cover.
7Remove screw holding the return arm in place.
8Disengage the return spring.
Duplex Route Motor/
Solenoid Assembly
Return Arm Screw
Return Arm
Return Spring | Front |
| Mechanism |
Side Detail | Cover |
Upper Duplex
Roller Cover
Removal/Replacement Procedures |