(004 intentionally excluded)003Lower Cassette Test

1Make sure the lower paper cassette is installed with paper, the side and rear guides securely against the edges of the paper in the cassette.

2Go to: 003

3Press: READY to run the test.

4Refer to the chart below to confirm that the code that displays corresponds to the paper size in the cassette. (For example, if the cassette holds letter size paper, “1-3” should appear on the display.) This indicates the paper size sensor is working properly. Table 5-1, “Paper Size Codes” , lists the paper size codes.

Note

A 1-9 is displayed when a high-capacity paper feed unit is installed; refer to “021 - High Capacity Unit Input Test”

5Press: STOP to exit.

(004 intentionally excluded)

Diagnostic Tests

5-5