the magnetic roller.
•Reinstall the developer unit.
6Inspect and clean the cleaner unit/main charger:
Caution
Handle gently to avoid breaking the charger wire
•Inspect the unit for damage or contamination; repair or replace as necessary.
•Remove the main charger from the cleaner unit.
•Clean the grid with the cleaner brush.
•Remove the grid to expose the charger wire.
•Clean the charger wire with a cotton swab or charger cleaning tool.
•Reinstall the grid.
•Clean any excess toner from the cleaner unit with a soft cloth.
•Reinstall the main charger in the cleaner unit.
•Reinstall the cleaner unit.
7Clean and inspect the photoconductor unit area
Caution
Do not touch the photoconductor belt as this
permanently damages the unit
•Clean the photoconductor seam sensor inside the printer with a cotton swab or compressed air.
•Remove the photoconductor from its protective packaging.
•Inspect the photoconductor for damage or contamination; repair or replace as necessary.
•Reinstall the photoconductor unit.
8Clean the transfer charger
Caution
Handle gently to avoid breaking the charger wire
•Remove the transfer charger.
•Clean the transfer charger housing with a soft cloth.
•Clean the transfer charger wire with a cotton swab.
•Reinstall the transfer charger.
Have you completed the
No: Complete the procedure, then continue.
Yes: Continue.
Troubleshooting Analysis Guide (TAGs) |