Back Cover RemovalBack Cover Removal
To remove the back cover:
1Remove all external cables and attachments.
2Open the top and back covers.
3Disconnect CN31, CN32, CN37, CN40, CN41, CN74, and CN91.
4Duplex only: Disconnect CN36.
5For the hard drive option, disconnect the drive’s data cable.
6Remove the ground screw from the back cover.
7While supporting the back cover, remove the screw holding each strap.
Caution: hold the plastic strap to avoid throwing the screw as it comes loose.
8Lift the back cover up and away from the printer.
CN36 (C30D only)
CN37
CN40
CN41
|
| CN33 |
Ground |
| CN91 |
| Hard Disk Drive | |
Screw |
| |
CN74 | CN32 | Connector |
|
| |
| CN31 |
|
Removal/Replacement Procedures |