TAG 705: Multiple Paper Feeding
Error Code: | 705 |
Possible Causes: | Wrong weight or type of paper loaded |
| Paper improperly loaded |
Possible Defects: | Upper feed roller assembly |
| Lower feed roller assembly |
| Paper cassette |
1 Remove paper from the cassette.
•Fan the paper stack and place it in the cassette.
•Make sure the paper curl is turned up in the cassette.
•Make sure the paper is under the corner separators.
•Make sure the rear and side paper guides are positioned properly.
•Make sure the paper being used does not have a high static charge.
•Confirm that the paper in the cassettes meets paper specifications, outlined in the Guide to Operations at the back of this manual.
•Run at least 20 test prints.
Has the problem been resolved?
No: Continue.
Yes: The paper being used was at fault. Turn to TAG 002: Check & Problem Resolution.
2 Adjust the paper tension lever or pick pressure as outlined in Chapter 9, “General Printer Mainte- nance” .
Has the problem been resolved?
No: Replace the
Troubleshooting Analysis Guide (TAGs) |