Upper Cassette Mount RemovalUpper Cassette Mount Removal
To remove the upper cassette mount:
1Open the front, back, and top covers.
2Duplex only: Remove the duplex tray.
3Remove the upper and lower paper cassettes.
4Remove the left side cover. (See page
5Remove the paper feed drive cover (three screws).
6Remove the power control board cover (one screw).
7From the back, remove the two screws holding the upper cassette mount in place.
8Loosen the CN62 jack and pull it to the back of the printer.
9Disconnect CN62.
Mounting Screws | Power Control |
| Board Cover |
| Paper Feed Drive Cover |
| CN62 |
Back Detail
Removal/Replacement Procedures |