Vacuum Transport Unit Removal (Duplex)Vacuum Transport Unit Removal (Duplex)

To remove the duplex vacuum transport unit:

1Open the top cover.

2Remove the upper duplex roller cover (four screws).

3Remove the lower duplex roller cover (four screws).

4Disconnect CN22.

5Remove the C-clip from the gas spring on the side marked “up.” Gently move the gas spring out of the way so it does not block the wire harness area.

6Remove the four harnesses stays holding the cable in place.

7Remove the three ground screws.

8Remove the vacuum transport unit (four screws).

Harness Stays

Upper Duplex

Roller Cover

 

Vacuum Transport

Ground Screws

CN22

Harness Stay

Spring Detail

Lower Duplex

Roller Cover

Removal/Replacement Procedures

7-13