Specifications
GENERAL
Power Supply | : 12 V DC (11 V - 16 V) Test Voltage 14.4 V, Negative ground | |
Maximum Power Output | : 40 W x 4 channels at 400 Hz, Volume Control maximum | |
Power Output | : 20 W per channel into 4 Ω , 40 to 30,000 Hz at 3 % THD. | |
Tone Action | : Bass ; ± 12 dB at 100 Hz | |
| Treble; ± 12 dB at 10 kHz | |
Current Consumption | : Less than 2.5 A (tape mode, 0.5 W | |
: 2.0 V (CD Play mode; 1 kHz 0 dB) | ||
Speaker Impedance | : 4 Ω (4 - 8 Ω acceptable) | |
Dimensions (W x H x D) | : 7" x | |
Weight | : 3 lbs. 8 oz. (1.6 kg) |
|
|
|
|
AM RADIO |
|
|
Frequency Range | : 530 - 1,710 kHz |
|
Useable Sensitivity | : 28 dB/µV (25 µV/ S/N 20 dB) | |
|
|
|
FM STEREO RADIO |
|
|
Frequency Range | : 87.9 - 107.9 MHz |
|
Useable Sensitivity | : 12 dBf. (1.1 µV/ 75 Ω | , S/N 30 dB) |
50 dB Quieting Sensitivity | : 17 dBf. (1.8 µV/ 75 Ω | ) |
Frequency Response | : 30 - 15,000 Hz ±3 dB | |
Alternate Channel Selectivity | : 75 dB |
|
Stereo Separation | : 35 dB at 1,000 Hz |
|
Signal/Noise Ratio | : 70 dB (Mono) |
|
|
|
|
TAPE PLAYER |
|
|
Reproduction System | : | |
Tape Speed | : | |
FF/REW Time | : Less than 200 sec | |
Frequency Response | : 35 - 14,000 Hz ±3 dB | |
Wow and Flutter | : 0.12 % (WRMS) |
|
Signal/Noise Ratio | : 52 dB |
|
*Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
E
N
G
L
I
S
H
20
29