Panasonic CQ-SRX7000U manual GEQ Adjustment, Calling Back the Preset Tone Quality, Soft Sharp

<Audio Setting>

E N G L I

[BAND] (Set)

[}] [{]	[SEL] (Menu)
(Select/Adjust)	[]] [[]
	(Select)

Notes:

¡Operations except setting should be performed after returning to the mode display.

¡If no keys have been pressed for more than 15 sec- onds, the display returns to the previous one after changing to the menu display.

¡Press [DISP] to return to the regular mode.

S

H

16

	[DISP] (Return)
[P•SET}] / [}] : Heavy bass	• Recreation		• Stress relieving
	• Enjoyable drive
			• Refresh
		Heavy
[P•SET{] / [{] : Light bass			• Listen to the music
[TUNE[] / [[] : Sharp treble
[TUNE]] / []] : Soft treble	Soft		Sharp
Press [BAND] to set.
	• Calm down • Safe drive	Light	• Rhythmical
	• Concentration		• Awakening

GEQ Adjustment

Adjust the level for each frequency. GEQ Adjusting Display

qPress [TUNE[] or [TUNE]] / [[] or []] to

move the cursor.

w[P•SET}] / [}] : Upper level.

[P•SET{] / [{] : Lower level

Memorize

qPosition the cursor on “P • SET” using [TUNE[] or [TUNE]] / [[] or []].

wPress [P•SET}] or [P•SET{] / [}] or [{] to select preset number 1 to 5.

eAdjust the level for each frequency.

Note: New setting is overwritten on existing saved set- ting after following this procedure.

Calling Back the Preset Tone Quality

After changing to the GEQ adjusting display,

qPosition the cursor on “P • SET” using [TUNE[]

or [TUNE]] / [[] or []].

wPress [P•SET}] or [P•SET{] / [}] or [{] to select one of the preset numbers 1 - 6

Note: Memorizing and callback can not be performed by using [1] to [6] on the remote control.

25

CQ-SRX7000U