![Insert Mounting Collar q into the dashboard,](/images/new-backgrounds/11612/1161277x1.webp)
| E |
| N |
| G |
| L |
| I |
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries. | S |
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your | H |
hands and fingers.
34
❏Installation Procedures
First, complete the electrical con- | Insert Mounting Collar q into the dashboard, |
nections, and then check them for | 1 and bend the mounting tabs out with a screw- |
correctness. (a page 46). | |
| driver. |
Lock Lever
e Power Connector
Make sure that the lock lever is flush with the mounting collar (not projecting outward).
Mounting Tabs
wMounting Bolt
2 | Secure the rear of the unit. | |
After fixing Mounting Bolt w and Power Connector | ||
e, fix the rear of the unit to the car body by either | ||
3 | method (a) or (b) shown below. | |
Insert Trim Plate t. | ||
4 | After installation | |
reconnect the nega- | ||
tive | battery termi- |
Lock Lever | nal. |
|
(a) Using the Rear Support Strap y | |
| Fire Wall of Car |
uTapping Screw | 3 mmø |
| |
| iHex. Nut |
| yRear Support Strap |
| wMounting Bolt |
| qMounting Collar |
(b) Using the Rubber Cushion (Option)
Rear Support Bracket (Provided on the car)
Rubber Cushion (Option)
wMounting Bolt
qMounting Collar
43