One-touch selection of a preset station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Select a band and frequency (step q, w and e on the previous page)
qPress and hold [P•SET}] or [P•SET{] / [}] or [{] for more than 2 seconds until the preset number blinks.
wPress [P•SET}] or [P•SET{] / [}] or [{] to select a preset num- ber.
Manual Preset | e Press and hold [P•SET}] or [P•SET{] / [}] or [{] for more than | |
2 seconds to memorize. | ||
Memory | The display blinks once, and a receiv- | |
Manually save a station in | ||
ing station is saved in the memory. |
the preset memory.
Note: Frequency setting can be performed even after selecting a preset num- ber.
Entering numbers directly from the remote control
Select a band and frequency (step q, w and e on the previous page)
Press and hold [1] to [6] on the remote control for more than 2 seconds.
E N G L I S H
6
Auto Preset Memory
Automatically save strong stations in the preset memory.
Select a band (step q, w on the previous page)
Press and hold [BAND] for more than | Scanning | |
2 seconds. | ||
|
¡The 6 strongest available stations will be automatically saved in the memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. ¡To stop the scanning, press [P•SET}] or [P•SET{] / [}] or [{].
(Pressing [1] to [6] on the remote control also can stop the scanning.)
Note: New stations are overwritten on existing saved stations after following this procedure.
Preset Station Calling
Select a band (step q, w on the previous page)
Press [P•SET}] or [P•SET{] / [}] or [{] to select the preset number for tuning in the preset station.
Entering numbers directly from the remote control
Press [1] to [6] on the remote control.
15
