Panasonic CQ-VD7003U warranty Display Unit, Id-Code, Clock

Settings (continued)

English USER SCREEN AUDIO DVD INPUT/OUTPUT RADIO

DISPLAY UNIT

31Display adjustment

	TILT			(Tilt angle adjustment)
1	2	3	4	5	1	5
					default:	5
OPEN/CLOSE				(Monitor setting when power on)

ID-CODE

ID Code Setting

Prior to operating this unit, it is advisable to assign a 4- digit ID code for security. Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked so that a thief cannot use the stolen unit unless that per- son knows the code you have set.

The ID code operation must be performed only by the person to whom the unit belongs.

Generally, it is not necessary to enter the ID code each time when using the unit if it has not been disconnected from the main power supply (car battery).

AUTO

MANUAL

Note:

:the monitor is opened automatically when turning ON ACC.

:the monitor is not opened automatically. default: MANUAL

0 to 9 4 digits numeric code

default: none

How to set your ID code (for the first time)

qEnter an 4 digit ID code.

¡The monitor position setting menu can also be dis- played by pressing the [TILT] button on the display unit for more than 2 seconds. (a page 17)

CLOCK

Clock setting

	DISPLAY		(Clock display)
	OFF	: clock display OFF
	ON	: clock display ON (“12:00” is displayed
		before adjusting the clock.)
			default: OFF
HOUR ADJUST			(Hour adjustment)
	: moves back one hour
]
	: forward one hour
[
MINUTE ADJUST			(Minute adjustment)

] : moves back one minute

[ : forward one minute

Note:

¡To start the clock, touch/press /[SRC]. ¡Set the Daylight Saving Time manually.

default: HOUR ADJUST: 12 MINUTE ADJUST: 0

wEnter the same 4 digit ID code again.

How to change your ID code

qEnter the preset (old) 4 digit ID code. If the wrong ID code is entered, a new ID code cannot be registered.

wEnter a new 4 digit ID code.

eEnter the new 4 digit ID code again.

How to cancel the known ID code

qEnter the preset (old) 4 digit ID code. If the wrong ID code is entered, it is not possible to cancel the ID code

function.

wTouch and hold until “COMPLETED!” is dis- played. The ID code cancelling procedure is completed. The unit now works without an ID code.

Note:

¡Should your unit ever require service, cancel your ID code before sending for repair.

¡The ID code setting cannot be eliminated even by the memory clear function.

¡The inputted code is not displayed for your security.

Caution

¡Record your registered ID code and keep it in a secure location. (Fill in the ID code memo (a page 46).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Servicenter.

32

CQ-VD7003U