Panasonic CQ-VD7700U, CQ-VD7500U Calendar, Touch Panel, Id-Code, Memory Clear, Month

E MENU: User Settings (continued)

N

G
L
I			: Previous menu
S
H			: Exit
40	Menu	Setting Value	Operations

CALENDAR	MONTH	Panel
		MONTH : ] or [
	default: Same as Clock
(Calendar Display)
Note: The calendar is not editable.	YEAR	YEAR : { or }
	default: Same as Clock	Remote
(e.g. Holidays cannot be marked.)

MONTH : []] or [[]

YEAR :[{] or [}]

This function executes no setting, only viewing.

TOUCH PANEL	This function is used only when there are some differences between the
	touching position and the symbol position displayed on the monitor.
(Panel touch position adjustment)
	This function is not used ordinarily.
Position difference between the touch-	q Touch the four corners of the touch panel counterclockwise.
ing position and the displaying symbol
	w Touch		END	to finish this setup. Touch		AGAIN	to retry.
position may appear in the following
situations:
1. The display position adjustment is	Touch forth			Touch third
executed.
2. The system is initialized.
3. The power is turned off soon after
the touch panel is adjusted.
For the cases above, readjust the
touch panel position.
Note: This function can be performed		Touch first
					Touch second
on the touch panel.

56

									: Previous menu
									: Exit
Menu		Setting Value				Operations
	0	to	9		Panel	0	to	9
ID-CODE
	4 digits numeric code				Remote	[0] to [9]
(ID Code Setting)
				default: none
Prior to operating this unit, it is advis-	Caution: Record your regis-				How to set your ID code (for the first time)
able to assign a 4-digit ID code for	tered ID code and keep it in a
					q Enter an 4 digit ID code.
security.	secure location. If you forget it,
					w Enter the same 4 digit ID code again.
(Make sure to use four digits for ID	you will be unable to use the
					How to change your ID code
code.)	unit. In case you forget the ID
					q Enter the preset (old) 4 digit ID code.
Once the ID code has been set, the unit	code, please consult your near-
					If the wrong ID code is entered, a new
cannot be operated if the main power	est Panasonic Servicenter.
					ID code cannot be registered.
supply is disconnected then re-con-
	Note: The inputted code is not				w Enter a new 4 digit ID code.
nected. It is electronically locked so
					e Enter the new 4 digit ID code again.
that a thief can not use the stolen unit	displayed for your security.
unless that person knows the code you					How to cancel the known ID code
have set.
					Note: Should your unit ever require service,
The ID code operation must be per-
					cancel your ID code before sending for repair.
formed only by the person to whom
					q Enter the preset (old) 4 digit ID code.
the unit belongs.
					If the wrong ID code is entered, it is
Generally, it is not necessary to enter					not possible to cancel the ID code
					function.
the ID code each time when using the
					w Press and hold [ENTER] until
unit if it has never been disconnected
					“Complete!” is displayed. The ID code
from the main power supply (car bat-
					cancelling procedure is completed.
tery).
					The unit now works without an ID
Note: The ID code setting cannot be					code.
					Note: Refer to ID Code Input regarding
eliminated even by the memory clear
					how to enter the ID code. (a page 6)
function.

		NO	:	Panel
MEMORY CLEAR
	no memory clear. The display
				YES	OK	: Memory clearance
All current memories are returned to
	returns to the previous one.
default settings.					CANCEL	: No Memory clearance
		YES	:	Remote
Note: In the SD mode, SD MENU set-	default settings
				[[] a [ENTER]		[[] a [ENTER]:
			default: NO
tings are not returned to the default
setting even when YES is selected as						Memory clearance
						[]] a [ENTER]: a
this setting.

No Memory clearance

Caution: Be aware that this setting restores the unit to default settings, so that all the memories and settings that you have set will be eliminated.

E

N

G

L

I

S

H

41

57

CQ-VD7700U/VD7500U CQ-VD7700U/VD7500U