N | Troubleshooting (continued) |
| ||
E |
|
|
| |
G |
|
|
| |
L |
|
| If the Unit Begins to Malfunction... | |
S |
|
| ||
I | Error Display Messages |
|
| |
H |
| Reset switch | ||
| ■ CD/MP3/DVD/Video CD/CD | |||
68 | Insert a hard, slender stick into the hole and push the switch. | |||
|
| |||
| Display | Possible cause a Possible solution | Important | |
|
|
| ||
| - E1 - | Disc is dirty, or is upside down. | Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.) | |
| If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs. | |||
| aCheck disc. | |||
| - E2 - | Disc has scratches. |
| |
| aCheck disc. |
| ||
|
| No operation by some cause. | ||
|
|
| ||
| - E3 - | aPress [u]. If failure persists, press the reset switch. (Press the reset |
| |
| switch in the CD changer). If normal operation is not restored, call the |
| ||
|
| store where you purchased the unit or the nearest Panasonic |
| |
|
| Servicenter. |
| |
E
N
G
L
I
S
H
69
- E4 -
NO DISC
NO MAGAZINE
REGION ERROR
NO CARD
NO FILE
X
CHECK CARD
The type of the file that is selected is not supported. aCheck disc.
No disc is in the player.
aInsert disc into the disc slot.
No magazine is in the changer.
aLoad the changer with
An attempt was made to play a disc with a region number other than “1” or “ALL”.
aPress [u] and check the disc.
No card is inserted into the card slot, the card is not inserted until it clicks, or the card is defective.
aMake sure of card insertion.
The unit cannot recognize the play file, or there is no file on the SD card.
aEnsure that the file name is proper and MP3/AAC files are recorded with
You are trying to play incompatible or corrupted data. These data cannot be played.
aCheck the
The card cannot be played.
aCheck the
Reset switch
Note: If the
Notes:
¡There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
¡Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating Instructions for the changer used.
84 | 85 |
