Panasonic CS-KE12NB41, CS-KE18NB4UW, CU-KE12NK1, CU-KE18NKU, CZ-18BT1U 3. Adjusting the Fan Speed, 4. Fan Only, 5. Night Setback Mode, 6. HIGH POWER Mode

10

3. Adjusting the Fan Speed

A. Automatic fan speed

Simply set the FAN SPEED selector button to the

position.

This automatically sets the best fan speed for the room

temperature.

B. Manual fan speed

If you want to adjust fan speed manually during operation,

just set the FAN SPEED selector button as desired. [ ,

, or ]

4. Fan Only

5. Night Setback Mode

Night Setback Mode is used for saving energy.

Press the NIGHT SETBACK button while unit is operating.

The mark appears in the display.

To release the night setback function, press the NIGHT SETBACK

button again.

A. In Cooling and DRY Mode: ( and )

B. In Heating Mode: ( )

6. HIGH POWER Mode

HIGH POWER mode can be used to increase the output of the

indoor unit for all operation modes except automatic operation.

Press the HIGH POWER button while unit is operating.

The mark appears in the display.

To cancel, press HIGH POWER button again.

If you want to circulate air without any temperature

control, follow these steps:

STEP 1 Press the MODE selector button to switch to

the fan mode .

STEP 2 Press the ON/OFF operation button.

STEP 3 Press the FAN SPEED selector button to

select the fan speed of your choice ( ,

or ).

• There is no FAN only function at M of the S/M switch

on the remote controller.

STEP 2

STEP 1

STEP 3

NOTE

When the night setback mode is selected, the air conditioner

automatically raises the temperature setting 2 °F when 30 minutes

have passed after the selection was made, and then another 2 °F

after another 30 minutes have passed, regardless of the indoor

temperature when night setback was selected. This enables you

to save energy without sacrificing comfort. This function is

convenient when gentle cooling is needed.

Setting

temperature

Press the NIGHT

SETBACK button

30 min. 30 min. Time

2°F