Panasonic DMCFX100K Picture size and maximum zoom magnification, ± Available, Not available, P62

Basic

∫Picture size and maximum zoom magnification

(±: Available, —: Not available)

Aspect		Picture size				Maximum	Extended
	ratio					zoom magnifi-	optical
		(P26, 63)
(P62)						cation (Tele)	zoom
		/ (12M)
			(10.5M)			3.6k	—
					(9M)
			(8M EZ)			4.4k	±
			(7M EZ)
			(6M EZ)
			(5M EZ)			5.6k	±
			(4.5M EZ)
			(3.5M EZ)
		(3M EZ)
		(2M EZ)
				/
		(0.3M			EZ)	7k	±
					/
		(2.5M			EZ)
			(2M EZ)

∫Extended optical zoom mechanism

When you set the picture size to [ ] (3M EZ) (3 million pixels), the 12M

(12.2 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect.

•The optical zoom is set to Wide (1k) when the camera is turned on.

•If you use the zoom function after focusing on the subject, focus on the subject again.

•The lens barrel extends or retracts according to the zoom position. Take care not to interrupt the motion of the lens barrel while the zoom lever is rotated.

•In motion picture mode [ ], the zoom magnification is fixed to the value set at

the start of recording.

28

•“EZ” is an abbreviation of “Extended optical Zoom”.

•If you set a picture size that activates the extended optical zoom, the extended optical zoom icon [ ] is displayed on the screen when you use the zoom function.

•The zoom will stop moving for an instant near [W] (1k) when the extended optical zoom is used. This is not a malfunction.

•The indicated zoom magnification is an approximation.

•In motion picture mode [ ] and [HIGH SENS.] or [HI-SPEED BURST] in

scene mode, the extended optical zoom does not work.

Using the Easy zoom

You can zoom at high speed from Wide to Tele by pressing [E.ZOOM].

The zoom magnification differs depending on the picture size that is set.

VQT1F52