Panasonic DMCFX100K, DMC-FX100 NUM. of Prints, Paper Size, Postcard, Card Size, Letter, Layout

Connecting to other equipment

•If the printer does not support date printing, the date cannot be printed on the picture.

•[NUM. OF PRINTS]

Set the number of prints.

•You can set up to 999 prints.

•[PAPER SIZE]

(Paper sizes that can be set with this unit) The paper sizes are displayed on pages 1/2 and 2/2. Press 4 to select.

1/2

	Settings on the printer are
	prioritized.
[L/3.5qk5q]	89 mmk127 mm
[2L/5qk7q]	127 mmk178 mm
[POSTCARD]	100 mmk148 mm
[A4]	210 mmk297 mm
2/2¢
[CARD SIZE]	54 mmk85.6 mm
[10k15cm]	100 mmk150 mm
[4qk6q]	101.6 mmk152.4 mm
[8qk10q]	203.2 mmk254 mm
[LETTER]	216 mmk279.4 mm

¢These items cannot be displayed when the printer does not support the paper sizes.

•[PAGE LAYOUT]

(Layouts for printing that can be set with this unit)

Settings on the printer are prioritized.

1 picture with no frame on 1 page

1 picture with a frame on 1 page

2 pictures on 1 page

4 pictures on 1 page

•An item cannot be selected if the printer does not support the page layout.

∫Setting the date printing with the

DPOF print in advance

We recommend setting DPOF date printing with [DPOF PRINT] (P85) in advance when the printer supports it. If you select [DPOF PICTURE], printing starts and the recording date is printed.

∫Layout printing

•When printing a picture several times on 1 sheet of paper

For example, if you want to print the same picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [ ] and then set [NUM. OF PRINTS] to 4 for the picture that you want to print.

•When printing different pictures on 1 sheet of paper

For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to [ ] and then set [COUNT] in [DPOF PRINT] (P84) to 1 for each of the 4 pictures.

•Do not disconnect the USB connection

cable when the cable disconnection warning icon [ ] is displayed. (Depending on the printer, the icon may not be displayed.)

•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.

•The camera is receiving an error message from the printer when the [¥] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.

•If the total number of DPOF prints or the number of DPOF pictures printed is high, pictures may be printed several times. The remaining number of prints indicated may differ from the number set. This is not a malfunction.

97

VQT1F52