Panasonic DMCFX100S, DMC-FX100, DMCFX100K BABY1/BABY2, Pet, Age display setting, Birthday setting

Advanced (Recording pictures)

1

2

[BABY1]/[BABY2]

• If you turn on the camera in [BABY1]/

[BABY2], the age and current date and

time are displayed for about 5 seconds on

the bottom of the screen.

Press [ MENU/SET ] to display the [SCENE MODE] menu and select a scene mode. (P46) This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual.

You can set two different birthdays by using [BABY1] and [BABY2]. You can display the set age when playing back the pictures and stamp the age on the recorded pictures with [DATE STAMP] (P82).

•The age can also be printed on each picture by using the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied).

∫Age display setting

•To have the age displayed, first set the birthday and then be sure to set [WITH AGE] before taking the pictures.

∫Birthday setting

1Press 3/4 to select [BIRTHDAY SET.] and then press [MENU/SET].

2When a message appears, press 2/1

to select items (Year/Month/Day) and then press 3/4 to set them.

3Press [MENU/SET] to finish the setting.

•The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 30 cm (0.98 feet) (Tele) to ¶]

•The ISO sensitivity becomes the same as when Intelligent ISO sensitivity mode

[ ] is set to a highest ISO sensitivity of [ISO400].

50

• The age display style differs depending on

the language setting in the recording

mode.

• If the age is not properly displayed, check

the clock and birthday settings.

• If the camera is set to [WITHOUT AGE],

the age is not recorded even if the time

and birthday are set. This means the age

cannot be displayed even if camera is set

to [WITH AGE] after taking the pictures.

• The birthday setting can be reset with

[RESET].

• You cannot use the following functions.

– [D.ZOOM]

– [SLOW SHUTTER]

[PET]

Press [ MENU ] to display the [SCENE MODE]

/SET

menu and select a scene mode. (P46) Select this when you want to take pictures of a pet such as a dog or a cat.

This allows you to set the birthday of your pet. You can display the set age when playing back the pictures and stamp the age on the recorded pictures with [DATE STAMP] (P82).

•The age can also be printed on each picture by using the software [LUMIX

Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied).

Refer to [BABY1]/[BABY2] (P50) for information about age display setting and birthday setting.

•The initial setting for the AF assist lamp is [OFF]. (P68)

•Refer to [BABY1]/[BABY2] for other information about this mode.

VQT1F52