Panasonic DMC-FX100, DMCFX100K, DMCFX100S 1Press 2/1 to select the picture , 2Press 3 to select [PRINT START] , 3Disconnect the USB connection cable after printing.

Connecting to other equipment

VQT1F52

AUSB connection cable (supplied)

BAC adaptor (DMW-AC5PP; optional)

•It may take time to print some pictures.

Use a battery with sufficient battery power

or the AC adaptor (DMW-AC5PP;

optional) when you connect to a printer.

•Turn the camera off before inserting or

removing the cable for the AC adaptor

(DMW-AC5PP; optional).

1Turn on the camera and the printer.2Set the mode dial to [ ].3Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB conne ction cable with

the [ ] mark facing the [2] mark on

the [DIGITAL] socket.

•Hold the USB connec tion cable at 1

and insert straight in or take straight

out.

•If the mode dial is not set to [ ] when

the camera is connected to the printer,

disconnect the USB connection cable, set

the mode dial to [ ] and then connect

the USB connection cable again.

(Depending on the printer, it may be

necessary to turn it off and then on again.)

•Do not use any other USB connection

cables except the supplied one.

•If a card is not inserted when the camera

is connected to the printer, you can

access the picture data on the built-in

memory. If a card is inserted, you can

access the picture data on it.

•You cannot switch between the built-in

memory and the card while the camera is

connected to the printer. When you want

to switch between the built-in memory and

the card, disconnect the USB connection

cable, insert (or remove) the card and

then connect the USB connection cable to

the printer again.

•If you want to print the age in [BABY1]/

[BABY2] or [PET] in scene mode or the

number of days that have been passed

since the departure date in

[TRAVELDATE], use the software [LUMIX

Simple Viewer] or

[PHOTOfunSTUDIO-viewer-] in the

CD-ROM (supplied) and print from the

PC.

•To find out more about PictBridge

compliant printers, contact your local

dealer.

∫Selecting a single picture and printing

1Press 2/1 to select the picture

and then press [MENU/SET].

•The message disappea rs in about

2 seconds.

2Press 3 to select [PRINT START]

and then press [MENU/SET].

•Press [MENU/SET] to cancel printing

halfway.

3Disconnect the USB connection cable after printing.

PictBridge

1/3

100_0001

PLEASE SELECT

THE PICTURE TO PRINT

SELECT

MULTI PRINT

SET

SINGLE SELECT

NUM. OF PRINTS

PRINT WITH DATE

PAPER SIZE

PAGE LAYOUT

SELECTCANCEL SET

PRINT START

OFF

SET

DMC-FX100ENG.book 95 ページ２００７年５月１６日　水曜日　午後３時２２分