Panasonic DMCFX100S, DMC-FX100 Turn the TV on and select external input Turn the camera on

Connecting to other equipment

•With date printing, the setting on the printer may take priority over the setting on the camera. Check the date print setting on the printer also.

•The message [USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.]

appears if you change the mode dial to a mode other than [ ] while the camera and the printer are connected. Set the mode dial to [ ] again and then disconnect the USB connection cable. If

this happens during printing, stop printing and then disconnect the USB connection cable.

Playing Back Pictures on a TV Screen

∫Playing back pictures using the AV cable (supplied)

•Set the [TV ASPECT].

•Turn this unit and the TV off.

1 Connect the AV cable A (supplied) to the [AV OUT] socket on the camera.

98

•Connect the AV cable with the [] mark facing the [2] mark on the

[AV OUT] socket.

•Hold the AV cable at B and insert straight in or take straight out.

2 Connect the AV cable to the video input and the audio input sockets on the TV.

•1 Yellow:to the video input socket

•2 White:to the audio input socket

3 Turn the TV on and select external input.

4 Turn the camera on.

•Depending on the aspect setting, black bands may be displayed on the top and bottom or the left and right of the pictures.

•Do not use any other AV cables except the supplied one.

•Audio playback is monaural.

•Read the operating instructions for the TV.

•When you play back a picture vertically, it may be blurry.

•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set

[VIDEO OUT] in the [SETUP] menu.

•Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.

∫Playing back pictures on a TV with an SD Memory Card slot

Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot.

•Depending on the TV model, pictures may not be displayed on the full screen.

•Motion pictures cannot be played back. To play back motion pictures, connect the camera to the TV with the AV cable (supplied).

•You may not be able to play back MultiMediaCards.

VQT1F52