Others

and then activated again for the actual recording.

Playback

1: The picture being played back is rotated and displayed in an unexpected direction.

The camera has a function that automatically rotates the display of pictures recorded holding the camera vertically. (If you take pictures when aiming the camera up or down, the camera may recognize that it is being held vertically.)

You can display the pictures without being rotated when [ROTATE DISP.] (P78) is set to [OFF].

You can rotate pictures with the [ROTATE] function. (P78)

2:The picture is not played back.

Is the mode dial set to playback [ ]?

Is there a picture on the built-in memory or the card?

The pictures on the built-in memory appears when a card is not inserted. The picture data on the card appears when a card is inserted. (P13)

3:The folder number and the file number are displayed as [—] and the screen turns black.

Is the picture edited with a PC or recorded with a digital camera from another manufacturer?

This may also happen if the battery is removed immediately after recording or if recording with a exhausted battery.

Format the data to delete the pictures mentioned above. (P90) (Formatting irretrievably deletes all data including the other pictures. Check the data carefully before formatting.)

4:The picture is displayed with a date different from the actual recording date in calendar playback.

Was the picture edited with a PC or recorded with a digital camera from another manufacturer?

This kind of picture may be displayed with a date different from the actual

108

recording date in calendar playback. (P69)

Is the clock in the camera set properly? (P14)

For example, if the clock setting on the camera is different from the date and time set on the PC and you acquire pictures recorded with the camera to the PC and then write them back to the card, the pictures may be displayed with dates different from the actual recording dates in calendar playback etc.

5:White round spots like soap bubbles appear on the recorded picture.

If you take a picture with the flash in a dark place or indoors, white round spots may appear on

the picture caused by the flash reflecting of particles of dust in the air. This is not a malfunction.

A characteristic of this is that the number of round spots and their position differ in every picture.

TV, PC and printer

1:The picture does not appear on the television.

Is the camera connected to the TV correctly?

Set the TV input to external input mode.

2:The display areas on the TV screen and the camera’s LCD monitor are different.

Depending on the TV model, the area display may be smaller so the picture may be stretched horizontally or vertically and the top and bottom or left and right of the picture may be cut off when it is displayed. This is due to the TV specifications and is not a malfunction.

3:The motion pictures cannot be played back on a TV.

Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

VQT1J82

Page 108
Image 108
Panasonic DMC-FX33 operating instructions 108, Then activated again for the actual recording, Picture is not played back